Fiber laser cutting machine irradiates the material surface with high-energy laser beam to achieve the purpose of cutting. Compared with the traditional mechanical knife, it has the advantages of high cutting precision, fast speed, narrow slit, and smooth cutting surface. It is an advantage that many traditional mechanical knife cutting does not have, but as Faults of machining equipment are unavoidable, we can only reduce the occurrence of faults as much as possible, hurry up and learn from fiber laser cutting machine manufacturer MEN-LUCK!
1. Prepare the fiber laser cutting machine before starting it
Before the official operation, it is necessary to test the machine or run it dry to make sure that the equipment can run smoothly and flexibly, and all components are in normal operation before the production operation can be carried out. If there is no problem in the test machine in advance, the failure rate in the actual production process will be greatly reduced.
2. Inspection during the operation of fiber laser cutting machine
When the fiber laser cutting machine is turned on and running dry, check various instruments and meters to see if the voltage circuit value is normal; if the current cannot exceed the rated value; whether the position of the pointer of the air pressure gauge is within the specified range; whether the air pressure is normal; All relevant data must be checked, so that the equipment can work accurately and efficiently in the actual production process. In actual operation, the staff should also regularly check the cutting status of the fiber laser cutting machine in the chassis. If a fault is found, the power should be turned off immediately to stop the inspection to avoid damage to more components.
3. Precautions for operation after shutdown and shutdown
Preparations need to be made before starting up, and the same is true when shutting down. After the fiber laser cutting machine is shut down, the host computer of the control system must be turned off first, then shut down, and finally power off. It’s like shutting down a desktop computer before disconnecting it from the power source. It is very good to avoid the instability of the control system caused by sudden power failure. If there is a problem with the system, the equipment cannot be used normally, or the related components will be damaged directly or indirectly. In addition, after all parts of the machine stop running, it is necessary to clean up the equipment, such as oil stains, uncleaned dross, etc., to better eliminate hidden dangers.
The normal operation of the equipment is closely related to the daily maintenance. Only by doing the basic work well can the efficient operation of the equipment be guaranteed. For more information on the daily maintenance of fiber laser cutting machine equipment, please visit our official website to learn!
Post time: Jun-06-2023