First of all, how is the laser cutting burr produced? The laser beam irradiates to the surface of the workpiece so that the surface of the workpiece vaporizes and evaporates to achieve the purpose of cutting. If the slag generated in the cutting process cannot be blown off in time, it becomes a hanging slag hanging on the workpiece after cooling, which is called a burr. Generally, the finished products may not meet the quality requirements if more slag is hung, or the post-processing process is required, increasing the production cost.
There is a gas device in the laser cutting process, its purity is very critical, if the purity is low, the hanging slag can not be all blown off. Equipment parameter setting is also a very critical factor, if the parameter setting error is large, it will produce more hanging slag. So if you find a burr, you need to check it first. Can be from the laser cutting machine output power is too large or too small, the focus of the beam is accurate, the purity of the cutting gas is not enough, the cutting speed is too slow, the laser cutting machine operation time is too long leading to instability and other reasons, according to the specific problem.
In summary, in addition to high gas purity, it is necessary to do a good job of equipment parameter debugging in order to reduce or avoid the appearance of hanging slag and improve the quality of cutting parts. Laser cutting machine in all walks of life application is very common, our company as a professional R & D manufacturer of laser cutting machine, many years of experience, the current industrial class, micro processing laser equipment variety, model complete, can meet a variety of thickness and size of the plane, surface, pipe type workpiece processing needs, The precision can reach up to 0.05um, especially in the medical interventional instruments, surgical instruments cutting has a unique advantage.
For more information about laser cutting, please feel free to call us at +86 180 9444 0411!
Post time: Aug-01-2023