• head_banner_01

Can hand-held laser welding shake traditional TIG welding and MIG welding?

Can hand-held laser welding shake traditional TIG welding and MIG welding?

As everyone in the welding circle knows, traditional MIG welding and TIG welding are widely used in the industry. However, these two welding methods have high requirements for the skills of welders. Welders need to spend a lot of time mastering the welding essentials. The laser handheld welding system makes it very easy for ordinary people to get started, and can easily obtain high-quality welding effects.

We have conducted a series of performance tests on the welding specimen of laser handheld welding, such as tension, bending, and metallography. Next, let’s see whether the welding quality of the handheld laser welding system can pass the test successfully.

112

01、 Features

• The laser power is up to 1500W. For different materials and thicknesses, the best welding settings can be quickly selected through the intuitive adjustment knob.

•  Utilize 74 stored preset and user-defined process parameters to enable novice welders to master welding operations through several hours of training.

• Select the storage mode to provide peak power of up to 2500W, to have stronger welding capability.

• A new cleaning function is added on the original basis, which can quickly and easily remove oil, rust, and coating before welding, and remove surface residues and oxidation discoloration after welding. The beautiful weld can be obtained without the use of abrasives or chemicals, saving additional costs and time.

02、 Weldable materials

Material Science ThicknessSingle side weld ThicknessDouble side weld
stainless steel 4mm 10mm
mild steel 4mm 10mm
aluminium 4mm 10mm
copper 1mm 2mm

 

03、 Advantages

•  High welding:4 times faster than traditional welding, increasing productivity and reducing the cost of each workpiece.

•  High welding quality: Uniformly welded thick materials, thin materials, and reflective metals without deformation, undercut, or burn-through, and the heat-affected area is very small.

•  Easy to use: Simple setting, learning, and operation with depression, can realize uniform high-quality welding and cleaning.

•  Weld appearance: Oil stain, rust, and coating shall be removed before welding, and surface residue and oxidation discoloration shall be removed after welding, saving the time and cost of using abrasives or chemicals.

•  Wide range of materials: Metals of different thicknesses, ultra-thin parts, copper welding, and materials with different conductivity.

•  Swing welding: The swing width is up to 5mm, improving the welding ability and the weld height is beautiful.

•  Operator safety: Multistage sensors and interlocking safety devices

  Traditional welding method Laser welding
welding speed ordinary More than 4 times faster
welding quality Depends on operator experience High quality effect
Learning difficulty hard Easy to use
Preparations for workpiece welding Preparation is important and troublesome Less and simple preparation
Workpiece preparation before welding Material flexibility Limited by material change Wide range, no need to set
Heat affected zone large Small
Bending and deformation Very easy to deform Not easy to deform
Swing welding None Swing width up to 5mm

 

04. Technical parameters

laser power High peak power power Mode storage capacity Cleaning width and length Swing length and frequency Dimensions (L * W * H) weight
1500W 2500W 220V,24A 74 15mm Up to 300H, up to 5mm 641*316*534mm 53KG

We can see that the performance of laser hand-held welding is far superior to traditional TIG welding and MIG welding in many aspects. Perhaps shortly, the welding field will be the world of laser hand-held welding.


Post time: Nov-30-2022

  • Previous:
  • Next: